Keyestudio Plus Starter Kit for Arduino - Programming Education Kit

The Keyestudio KS0541 Basic Starter Kit is a breadboard learning kit with over 150 parts and 20 step-by-step Arduino projects. It covers LEDs, 7-segment and dot matrix displays, an I2C LCD, sensors, buzzers, a DC motor and transistor driving. This version does not include a mainboard. It is ideal if you already own an Arduino Uno R3 or compatible board and want the parts and lessons to go with it.

Key Features

• 20 guided projects with wiring diagrams, circuit diagrams, component explanations and ready-to-upload code
• Progresses from the basics (blinking an LED, serial output) to multiplexed displays, shift registers, PWM motor control and sensor-driven projects
• Programmed in C/C++ using the free Arduino IDE
• Solderless breadboard build, so every circuit can be pulled apart and reused
• Good value for classrooms and anyone who already has a board

Board Required

A microcontroller board is not included. The tutorials are written for the Keyestudio PLUS board, which is fully Uno R3 compatible, so any Arduino Uno R3 or Uno-compatible board will work with the included projects. If you need a board as well, choose the KS0540 version or add an Uno-compatible board to your order.

Projects Included

1. Hello World (serial monitor)
2. LED Blinking
3. Breathing LED (PWM)
4. Traffic Light
5. RGB LED
6. Flowing Light
7. Active Buzzer
8. Passive Buzzer (playing a melody)
9. 74HC595N Shift Register Controlling 7 LEDs
10. 1-Digit 7-Segment Display
11. 4-Digit 7-Segment Display
12. 8x8 Dot Matrix Display
13. Desk Lamp (button with debouncing)
14. Electronic Hourglass (tilt switch)
15. I2C 128x32 LCD Display
16. Fan (DC motor with NPN and PNP transistors)
17. Dimming Light (potentiometer)
18. Flame Alarm
19. Light-Controlled Lamp (photoresistor)
20. Temperature Instrument (thermistor)

What's Included

• 10 x Red LED
• 10 x Yellow LED
• 10 x Green LED
• 10 x Blue LED
• 10 x White LED
• 1 x RGB LED (common cathode)
• 10 x 220Ω Resistor
• 10 x 1KΩ Resistor
• 10 x 4.7KΩ Resistor
• 10 x 10KΩ Resistor
• 1 x 10KΩ Potentiometer
• 1 x Active Buzzer
• 1 x Passive Buzzer
• 4 x Push Button
• 4 x Button Cap (2 yellow, 2 blue)
• 1 x Tilt Switch
• 3 x Photoresistor
• 1 x Flame Sensor
• 1 x Thermistor
• 1 x 74HC595N Shift Register IC
• 1 x 1-Digit 7-Segment Display
• 1 x 4-Digit 7-Segment Display
• 1 x 8x8 LED Dot Matrix Display
• 1 x 128x32 I2C LCD Module (ST7567A)
• 2 x S8050 NPN Transistor
• 2 x S8550 PNP Transistor
• 1 x DC Motor
• 1 x Fan Blade
• 1 x Resistor Colour Code Card
• 1 x Breadboard
• 30 x Jumper Wire
• 10 x Female-to-Female Dupont Wire

Tutorials and Code

Full tutorials, wiring diagrams, example code and the required LCD library are available in the Keyestudio KS0540/KS0541 documentation.