Elegoo Rapid PETG Black 1.75mm 1kg
Elegoo Rapid PETG Black 1.75mm 1kg has a 5-10 day lead time before dispatch. Order will only be sent once all items are available for delivery.
Overview
Elegoo Rapid PETG is built for speed without sacrificing strength. It's formulated to run at up to 600mm/s, so it's a strong fit if your printer is capable of high-speed printing and you want to cut turnaround time on functional or production runs. Beyond speed, it keeps PETG's core advantages: good impact resistance, resistance to moisture and weathering, and enough rigidity for parts that need to hold their shape under load.
Key Features
- Rated for high-speed printing up to 600mm/s
- Water and weather resistant, suited to outdoor or functional parts
- Tough and impact-resistant for parts that need to last
- Low warping and shrinkage with reliable flow characteristics
- Increased rigidity for structural strength and stability
- Tight dimensional accuracy of ±0.02mm for consistent prints
- Vacuum-sealed with desiccant to keep the spool dry out of the box
Printing Specifications
| Property | Value |
|---|---|
| Filament Diameter | 1.75mm |
| Recommended Nozzle Temperature | 240–270°C (250°C recommended) |
| Recommended Bed Temperature | 65–75°C |
| Chamber Temperature | 25–50°C |
| Printing Speed | Up to 600mm/s |
| Recommended Nozzle Size | ≥0.2mm |
| Net Weight | 1kg per spool |
| Empty Spool Weight | 154 ± 10g |
| Build Plate | Textured/Smooth PEI or similar |
| Build Plate Glue | Recommended |
| Enclosure Required | Not required |
Material Properties
| Property | Value |
|---|---|
| Density | 1.29 g/cm³ |
| Melting Temperature | 216°C |
| Tensile Strength (X-Y) | 42 ± 2 MPa |
| Elongation at Break (X-Y) | 8.9% ± 1.5% |
| Bending Strength (X-Y) | 68 ± 2 MPa |
| Heat Deflection Temperature (0.45MPa) | 72°C |
Storage & Handling
This filament needs drying before use, not just as a suggestion. Dry the spool at roughly 60°C for 8 hours prior to printing, and keep it sealed with desiccant and below 20% RH humidity when not in use. Skipping this step is the most common cause of stringing, bubbling, or inconsistent layers with PETG.
Specifications sourced from manufacturer data and may vary slightly by batch.
This product can be found here:
