Elegoo PLA Grey 1.75mm 1kg
Elegoo PLA Grey 1.75mm 1kg has a 5-10 day lead time before dispatch. Order will only be sent once all items are available for delivery.
Overview
Elegoo PLA in Grey is a reliable, easy-to-run filament for anyone from first-time printers to experienced makers. It lays down smooth, consistent layers with minimal warping, holds tight dimensional tolerances, and produces a clean matte-to-satin finish that suits everything from functional prototypes to display prints. Made from plant-based, biodegradable PLA, it's a straightforward choice when you want dependable results without fighting your printer's settings.
Key Features
- Smooth extrusion with strong layer adhesion and low warping
- Tight dimensional accuracy of ±0.02mm for consistent, precise prints
- Vacuum-sealed with desiccant to keep the spool moisture-free out of the box
- Neatly wound with a wide inner spool diameter for smooth, tangle-free feeding
- Broad compatibility with most 1.75mm FDM printers
- Plant-based and biodegradable material
Printing Specifications
| Property | Value |
|---|---|
| Filament Diameter | 1.75mm |
| Recommended Nozzle Temperature | 190–230°C |
| Recommended Bed Temperature | 35–65°C |
| Chamber Temperature | 20–45°C |
| Printing Speed | Up to 300mm/s |
| Recommended Nozzle Size | ≥0.2mm |
| Net Weight | 1kg per spool |
| Empty Spool Weight | 154 ± 10g |
| Build Plate | Textured/Smooth PEI or similar |
| Enclosure Required | Not required |
| Bed Adhesive Required | Not required |
Material Properties
| Property | Value |
|---|---|
| Density | 1.26 g/cm³ |
| Melting Temperature | 158°C |
| Tensile Strength (X-Y) | 38 ± 3 MPa |
| Elongation at Break (X-Y) | 10.5% ± 2.1% |
| Bending Strength (X-Y) | 72 ± 5 MPa |
| Heat Deflection Temperature (0.45MPa) | 57°C |
Storage & Handling
Like all PLA, this filament performs best kept dry. Store the spool sealed with its desiccant when not in use, and keep humidity below 20% RH. If prints start showing stringing or surface bubbling after long storage, dry the spool at roughly 50°C for 8 hours before your next print.
Specifications sourced from manufacturer data and may vary slightly by batch.
This product can be found here:
