12V / 24V PIR Motion Sensor Switch for LED Strips - 6A

This 12V / 24V PIR motion sensor switch turns any single colour LED strip into motion-activated lighting. Wired inline between your DC power supply and the strip, it detects movement up to 8 m away, switches the lights on, then turns them off again after an adjustable 1 to 10 minute delay. A simple 12V motion detector for wardrobes, pantries, stairways, hallways, garages, caravans and under-cabinet lighting.

Features

• Works with 12V and 24V DC LED strips and lights
• Switches loads up to 6A
• PIR movement sensor with 5 to 8 m detection range and 120° angle
• Adjustable off delay from 1 to 10 minutes
• Works day and night (no light sensor, so it triggers in any lighting)
• Clean on/off switching with no flicker
• Very low standby draw (under 1W)
• Screw mount with 2 fixing holes

Wiring

The sensor has 4 screw terminals:

• INPUT + / -: connect to your 12-24V DC power supply
• OUTPUT + / -: connect to your LED strip

The output voltage matches the input, so use a 12V supply for 12V strips and a 24V supply for 24V strips. This sensor is designed for two-wire single colour LED strips.

Installation Tips

• Mount at a height of 2 to 3.5 m for best coverage
• Point the lens towards where people will walk, with a clear line of sight
• Avoid aiming at heaters, air vents or direct sunlight, which can cause false triggers

Specifications