Arduino Starter Kit – 40+ Component Kit with Motors, Sensors & Displays

The Zaitronics Arduino Starter Kit is a complete electronics learning bundle for Australian makers, students, and hobbyists. With over 40 components, it goes well beyond a typical entry-level kit, covering motors, displays, and relays alongside the usual LEDs and sensors, so you can build real, functional projects, not just blink an LED and stop.

What Makes This Kit Different?

Most starter kits give you buttons, a potentiometer, and basic LEDs, then leave you needing a second kit the moment you want to control a motor or drive a display. This kit is built for depth from day one: a servo motor, a stepper motor with driver board, an L293D motor driver IC, a relay module, a 16×2 LCD, and both single and 4-digit 7-segment displays are all included, alongside the full range of sensors and input modules you'd expect. It's one kit that carries you from your first LED circuit through to motor control and display-driven projects.

Complete Component List (40+ Pieces):

Core Development:

• Arduino UNO R3 Compatible Board (CH340 USB Chipset)
• 830 Tie-Point Solderless Breadboard – Professional-grade prototyping
• USB A-B Cable – For programming and power
• Breadboard Power Supply Module (5V/3.3V, 1A)

Sensors & Input Modules:

• DHT11 Temperature & Humidity Sensor
• HC-SR04 Ultrasonic Distance Sensor
• Sound Sensor Module
• Thermistor
• 2× LDR Light Dependent Resistors (Photoresistors)
• Tilt Switch
• Water Level Sensor
• Joystick Module
• 10kΩ Potentiometer
• 4×4 Membrane Keypad
• IR Receiver Module + Remote
• 5× Mini Tactile Push Buttons

Motors & Drivers:

• SG90 Servo Motor
• Unipolar Stepper Motor with ULN2003 Driver Board
• L293D Dual Motor Driver IC
• Fan Blade with 3V DC Motor
• 5V Relay Module – Control high-power devices

Displays & Output Components:

• 16×2 LCD Display with I2C Interface (White on Blue)
• 1-Digit 7-Segment Display
• 4-Digit 7-Segment Display
• 5× White LEDs (5mm)
• 5× Yellow LEDs (5mm)
• 5× Blue LEDs (5mm)
• 5× Green LEDs (5mm)
• 5× Red LEDs (5mm)
• 1× RGB LED
• Active Buzzer – For alerts and alarms
• Passive Buzzer – For tone generation

Essential Components:

• 74HC595 8-Bit Shift Register (DIP)
• 2× 1N4007 Diode Rectifiers
• 2× PN2222 NPN Transistors
• 100× Resistors (10Ω, 100Ω, 220Ω, 330Ω, 1kΩ, 2kΩ, 5.1kΩ, 10kΩ, 100kΩ, 1MΩ)
• 65× Male-to-Male Dupont Cables
• 10× Female-to-Male Dupont Cables
• 9V Battery Connector with DC Plug

Tutorials & Lesson Plans Included:

Structured Lesson Plans: Access a complete downloadable lesson curriculum covering beginner to advanced topics.

Arduino Tutorials: Follow our step-by-step Arduino tutorial series covering LED control, sensor reading, motor control, displays, and more.

General Project Guides: Explore our full library of guides, many built directly around the Arduino Uno.

What You'll Learn:

• Arduino programming fundamentals using the Arduino IDE
• Digital and analog input/output control
• Sensor integration and data reading
• LCD and 7-segment display programming
• Servo, stepper, and DC motor control
• Relay control for switching high-power devices
• Shift register-based output expansion
• IR remote control and sound/light sensing projects

Perfect For:

• Students learning electronics and programming
• Absolute beginners starting their first microcontroller project
• Educators teaching circuit design and coding fundamentals
• Hobbyists building physical computing projects
• Makers who want motors, displays, and sensors in one kit, not three

Already comfortable with the basics and want WiFi and Bluetooth built in? Check out our ESP32 Starter Kit for the next step up into IoT development.

Australian Stock • Fast Shipping • Expert Support • Comprehensive Tutorials

Note: Requires a computer with Arduino IDE installed (free software). All tutorials and lesson plans are provided digitally.

This product can be found here:

• Arduino / ESP32 Kits
• Kits