ESP32-S3 Development Board with 7" Capacitive Touch Display, 800x480
ESP32-S3 Development Board with 7" Capacitive Touch Display, 800x480 has a 5-10 day lead time before dispatch. Order will only be sent once all items are available for delivery.
Features
ESP32-S3-Touch-LCD-7 is a microcontroller development board with 2.4GHz Wi-Fi and Bluetooth 5 (LE) support, with large Flash and PSRAM onboard. The 7 inch capacitive touch screen runs GUI programs such as LVGL smoothly, and the CAN, RS485 and I2C interfaces make it well suited to HMI panels, dashboards and control projects.
- Xtensa 32-bit LX7 dual-core processor, up to 240MHz
- 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
- 512KB SRAM and 384KB ROM built in, with 16MB Flash and 8MB PSRAM onboard
- 7 inch IPS display, 800 × 480 resolution, 65K colour
- 5-point capacitive touch over I2C, with interrupt support
- Onboard CAN, RS485 and I2C interfaces, plus a sensor header
- TF card slot for storage expansion
- USB Type-C port, plus a separate USB to UART Type-C port
- 3.7V lithium battery header (PH2.0) with onboard charge management
- Flexible clock and independent module power settings for low power operation
Display Specifications
- Display panel: IPS LCD, 7 inch, 170 degree viewing angle
- Resolution: 800 × 480 pixels, 65K colours
- Display interface: RGB, driver IC ST7262
- Touch: capacitive, 5-point, GT911 controller over I2C
What's On Board
- ESP32-S3 SoC with 16MB Flash and 8MB PSRAM
- TF card slot
- USB Type-C port and USB to UART Type-C port, with a selector between UART1 and UART2
- CAN, RS485, I2C and sensor headers, with CAN and RS485 terminal resistor selectors
- I2C level selector (3.3V / 5V)
- 3.7V single lithium battery header
- BOOT and RESET buttons
- Power, charging and charge complete indicator LEDs
Documentation
This product can be found here:




