Seeed Studio XIAO ESP32-C3
Seeed Studio XIAO ESP32-C3 has a 5-10 day lead time before dispatch. Order will only be sent once all items are available for delivery.
Seeed Studio XIAO ESP32-C3
Seeed Studio XIAO ESP32-C3 is a Wi-Fi and Bluetooth development board built around the ESP32-C3 RISC-V chip, packed into the classic 21 x 17.8mm XIAO form factor. It runs a 32-bit RISC-V core at up to 160 MHz and is supported by Arduino and CircuitPython, making it a compact option for wireless IoT projects.
Wi-Fi and Bluetooth in a Thumb-Sized Board
The board provides a complete 2.4GHz Wi-Fi subsystem alongside Bluetooth Low Energy 5.0, and supports communication over 100m when paired with a U.FL antenna. Power design includes four working modes, with deep sleep consumption as low as 44 μA, plus built-in lithium battery charge management, making it well suited to battery-powered and wearable projects.
Thumb-Sized and Production-Ready
At 21 x 17.8mm, it keeps the classic XIAO footprint with single-sided component mounting, and its breadboard-friendly SMD design with no components on the back makes it easy to work with on the bench or integrate into a finished product.
Project Idea
The compact size of the XIAO ESP32-C3 makes it a good fit for small wearable devices, such as a pet tracker that locks its current location and publishes data over LoRa. You could extend a build like this with a compass module for direction and distance, or a barometric or accelerometer sensor for altitude and speed. Since the ESP32-C3 supports both Wi-Fi and BLE, tracker data can also be uploaded directly or bridged to MQTT over LoRa.
If range is a concern for a project like this, our 2.4GHz Wi-Fi Antenna is compatible with the XIAO ESP32-C3 and improves wireless range over the onboard antenna alone.
Specifications
| Processor | ESP32-C3, RISC-V single-core 32-bit, up to 160 MHz |
| Wireless | 2.4GHz Wi-Fi, Bluetooth Low Energy 5.0, Bluetooth Mesh |
| On-chip Memory | 400KB SRAM, 4MB flash |
| Interface | 1x UART, 1x I2C, 1x SPI, 11x GPIO (PWM), 4x ADC, Reset Button, Boot Button |
| Dimensions | 21 x 17.8mm |
| Power | Max 3.3V output 500mA, 380mA (fast) / 40mA (trickle) charging, 5V via VIN, 3.7V via BAT |
| Deep Sleep Consumption | 44 μA |
| Wi-Fi Power Consumption | 75mA active, 25mA modem-sleep, 4mA light-sleep |
| BLE Power Consumption | 27mA modem-sleep, 10mA light-sleep |
| Working Temperature | -40°C to 85°C |
Pinout
Resources
- Seeed Studio Wiki, full setup guides, pinout diagrams, and project examples
- ESP32-C3 Datasheet
- Browse our full range of XIAO Expansion & Breakout Boards
Prefer plug-and-play? Grab the pre-soldered XIAO ESP32-C3 instead.
This product can be found here:
