Elegoo PLA+ Beige 1.75mm 1kg
Elegoo PLA+ Beige 1.75mm 1kg has a 5-10 day lead time before dispatch. Order will only be sent once all items are available for delivery.
Overview
Elegoo PLA+ is a step up from standard PLA, built for makers who want extra toughness without giving up easy printing. It resists impact and deformation better than regular PLA, holds tight dimensional tolerances, and lays down a smooth, glossy finish with strong layer bonding. Whether you're printing functional parts or detailed models, PLA+ gives you a more durable result while still running at familiar PLA temperatures and speeds.
Key Features
- Enhanced toughness and impact strength compared to standard PLA
- Reduced brittleness and deformation, with better overhang and bridging performance
- Glossy surface finish with strong, consistent layer adhesion
- Tight dimensional accuracy of ±0.02mm for reliable, repeatable prints
- Vacuum-sealed with desiccant to keep the spool dry out of the box
- Neatly wound with sub-winding to minimise tangles and snapped lines
- Broad compatibility with most 1.75mm FDM printers
Printing Specifications
| Property | Value |
|---|---|
| Filament Diameter | 1.75mm |
| Recommended Nozzle Temperature | 200–230°C (215°C recommended) |
| Recommended Bed Temperature | 35–65°C |
| Chamber Temperature | 20–45°C |
| Printing Speed | Up to 280mm/s |
| Recommended Nozzle Size | ≥0.2mm |
| Net Weight | 1kg per spool |
| Empty Spool Weight | 154 ± 10g |
| Build Plate | Textured/Smooth PEI or similar |
| Enclosure Required | Not required |
| Bed Adhesive Required | Not required |
Material Properties
| Property | Value |
|---|---|
| Density | 1.30 g/cm³ |
| Melting Temperature | 161°C |
| Tensile Strength (X-Y) | 38 ± 2 MPa |
| Elongation at Break (X-Y) | 7.9% ± 1.6% |
| Bending Strength (X-Y) | 74 ± 4 MPa |
| Heat Deflection Temperature (0.45MPa) | 56°C |
Storage & Handling
Store the spool sealed with its desiccant when not in use, and keep humidity below 20% RH for best results. If you notice stringing or surface bubbling after long storage, dry the spool at roughly 50°C for 8 hours before your next print.
Specifications sourced from manufacturer data and may vary slightly by batch.
This product can be found here:
