1
of
7
Loading...
2.13inch E-Ink display HAT for Raspberry Pi - 250x122 - Black / White
Waveshare | SKU:
WS-12915
$26.40 AUD
Unit price
/
Unavailable
$24 exc GST
2.13inch E-Ink display HAT for Raspberry Pi - 250x122 - Black / White is backordered and will ship as soon as it is back in stock.
2.13inch E-Ink display HAT for Raspberry Pi - 250x122 - Black / White
$26.40 AUD
Unit price
/
Unavailable
Features at a glance
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- SPI interface, for connecting with controller boards like Arduino/STM32, etc.
- Onboard voltage translator, compatible with 3.3V / 5V MCUs
- Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
| operating voltage | 3.3V/5V | grey scale | 2 |
|---|---|---|---|
| interface | 3-wire SPI, 4-wire SPI | partial refresh time | 0.3s |
| outline dimensions | 65 × 30.2mm | full refresh time | 2s |
| display size | 48.55 × 23.71mm | refresh power | 26.4mW (typ.) |
| dot pitch | 0.194 × 0.194mm | standby current | <0.01uA (almost none) |
| resolution | 250 × 122 pixels | viewing angle | >170° |
| display color | black, white |
Onboard SPI control interface
for use with other controller boards like STM32/Arduino
| VCC | 3.3V/5V |
|---|---|
| GND | Ground |
| DIN | SPI MOSI pin |
| CLK | SPI SCK pin |
| CS | SPI chip selection, low active |
| DC | Data / Command selection (high for data, low for command) |
| RST | External reset, low active |
| BUSY | Busy status output (high for busy) |
This product can be found here: