WS2812B Addressable RGB LED Strip Black PCB - 5M 60 LEDs/m IP67
WS2812B Addressable RGB LED Strip Black PCB - 5M 60 LEDs/m IP67 has a 5-10 day lead time before dispatch. Order will only be sent once all items are available for delivery.
WS2812B Addressable RGB LED Strip Black PCB - 5M 60 LEDs/m IP67
This is a 5 metre WS2812B addressable RGB LED strip on a black PCB, with 60 individually controllable LEDs per metre and an IP67 waterproof rating. Each LED has a built-in constant-current driver chip, keeping colours consistent even when supply voltage drifts slightly from 5V, and the strip is fully compatible with WLED, working well with controllers such as the Gledopto WLED ESP32 controller.
The black PCB sits flush and unobtrusive against black aluminium channels, black enclosures, and dark mounting surfaces, and it hides dust and fingerprints better than a white PCB over time. If you're after a strip that shows less of the board itself between LEDs, this is the version to go with; if you'd rather maximise light output and reflection off the PCB, our white PCB IP67 version is the better pick.
Rated IP67, the strip is sealed against dust and water immersion, making it suitable for both indoor and outdoor installs. It's terminated at each end with a 3-pin plug, compatible with our JST SM pigtail connectors for extending or splicing runs, and can be powered with 5V DC from a microcontroller (not recommended for longer runs) or from a dedicated 5V power supply.
Specs
- WS2812B individually addressable RGB LEDs
- 60 LEDs per metre, 300 LEDs total
- 5 metres total length
- 5V DC input, 5V logic (often accepts 3.3V)
- 14W per metre (approx. 2.1A per metre at full-brightness white)
- IP67 waterproof rating
- Width: 12mm with silicone jacket, 11mm without
- Height: 4mm
- 3-pin plug at each end, plus additional power leads for high-current runs
Pinout
- Red: 5V
- Green: Data
- White: Ground
Long runs draw serious current, so make sure your power supply can keep up. The current figure above is the maximum draw under full-brightness white; typical colourful animations use a lot less under normal conditions. It's best to size up rather than down, since a larger power supply gives you headroom to expand your project later without needing an upgrade. Our WS2812B Power Calculator & Requirements Guide can help you work out exactly what you need.
Don't need RGB control? Our single colour LED strips are a simpler, cheaper option. Browse the full LED strip accessories range for everything else to complete your build.
This product can be found here:
